Photos
    Loading

    700x18-25 Inner Tubes x2 - Presta 48mm

    Designed for 700 mm diameter road wheels with an 18 to 25 mm cross section tyre.

    More details
    SKU: S100 (1620934)
    Select a color:
    Select a size:

    Delivery in 6 to 7 days

    € 3.24
    Characteristics Designed for 700 mm diameter road wheels with an 18 to 25 mm cross section tyre.
    Product Benefits
    1. Compatibility
      700 mm tyre and wheel, 18 to 25 mm cross section, with Presta valve
    2. Waterproof
      Very good quality 48mm Presta/French valve that maintains pressure
    Details
    Product feature
    1. How to choose your inner tube
      Write down all visible information from the tyre sidewall (diameter and width). For example, 700 x 23 means your tyre is 700 mm in diameter and 23 mm wide. You will also find the dimensions in mm in the international ETRTO measurements. For example: 23-622 means the tyre is 23 mm wide with an inner diameter of 700 mm (approx. 700 x 23 mm)
    2. Removing an inner tube
      Remove the old inner tube using B'Twin tyre levers (ref 8047839)
    3. What to check before installing your new inner tube
      Check the condition of your tyre and replace it if necessary. Make sure no objects are lodged in the tyre. Check the condition of the rim strip. A rim strip that is even slightly bent can cause punctures. Check that your rim does not have any other issues that could damage your inner tube.
    4. Fitting your inner tube
      Watch our video before you start. Pre-inflate the inner tube slightly to avoid pinching. Insert the valve, making sure you are using the correct valve for your rims. Put the inner tube entirely inside the tyre so that it fits inside the rim. Take care not to pinch the inner tube when fitting.
    5. Mounting the tyre
      Start by mounting the tyre from the opposite side of the valve Finish at the top of the valve to avoid pinching Never use a screwdriver or tyre lever to mount the tyre or you could pinch the inner tube, puncturing it.
    6. Inflating the tyre
      Inflate your tyre carefully, to the pressure recommended by the manufacturer (check the sidewall, written in PSI or in bars: 1 bar = 14.51 PSI) Regularly check that the tyre is in the right position while inflating.
    7. Tip from the pros
      To avoid punctures from pinching and for best tyre performance, we recommend that you check your tyres and inflate them to the suggested pressure before every ride.
    Product testing
    1. Composition
      Membrane : 100.0% Rubber - Synthetic
    2. Approved by
      Our inner tubes are tested continually by our professional teams, such as the U-19 PRO Racing Team and the MTB Racing Team.
    3. Storage advice
      Carry your inner tubes in a container to protect them from getting punctured (tool drum, original packaging, bag).
    4. Cleaning advice
      To get your wheel size, check the information on the tyre wall. Always carry a spare inner tube and a pump.
    5. Product restrictions
      Take care not to pinch the inner tube when fitting it.
    6. Product catchline
      First price road inner tube with Presta valve. Two at a time is better value
    7. Lab tested
      To guarantee optimal quality, 100% of our inner tubes are inflated for a period of 8 hours
    Product reviews
    3.6 / 5
    33 reviews
    33 users recommend this product
    Write a review
    • B'TWIN 700x18-25 Inner Tubes x2 - Presta 48mm

      25/10/2016
      Daniel (United Kingdom)
      Used for
      did the job
    • Inner tubes

      10/10/2016
      Albert (United Kingdom)
      Used for 2 to 8 weeks
      First ones I ordered one was faulty contacted yourselves and got new innertubs sent out straight away had no problems since would recommend and will by again
      Very good for the price
      A part from one that was faulty no complaints
    • Great as spares

      10/10/2016
      Ronnie (United Kingdom)
      Used for 7 to 12 months
      Bought as spares for on longer runs, never had to use but nice to know they are there incase I get a bad flat tyre on a longer ride
      price
    • Leaked at a join in the rubber

      19/09/2016
      R (United Kingdom)
      Used for 1 week or less
      Unacceptable. My new inner tube had a join in the rubber which looks rather like a repair. It leaks air slowly. This should not happen in a new tube.
      Cheap
      Faulty. No access thread on valve neck.
      Response of the brand
      You are correct that this sound very poor.
      I will forward your comments on to our quality control team immediately.
      Please bring these back to us for a refund/exchange/
      Regards,
      Peter Lazarus UK Cycling Market Manager DECATHLON
    • Teabag-riffic

      06/09/2016
      Charlie (United Kingdom)
      Used for 7 to 12 months
      I've had two of these tubes (700x23) tear at the join between the valve and the tube. These all happened during cycling, not pumping them up. It seems that the quality of that seal is pretty poor.

      Cheap as chips, but it would seem that the quality is iffy.
      Cheap
      Low quality - rupture at the valve
      Response of the brand
      Hello,
      Thank you for your feedback regarding these inner-tubes. I have forwarded your comments on to the product manager in charge of this item.
      Please return them to us for a exchange/refund.
      You may find this product to be more reliable which still offers terrific value for £1.99: http://www.decathlon.co.uk/700x18-25-bike-inner-tube-presta-id_8311082.html
      Regards,
      Peter Lazarus UK Cycling Market Manager DECATHLON
      Charlie was satisfied with this answer
    1. 1
    2. 2
    3. ...
    4. 6
    5. 7