Photos
    Loading

    Shimano Deore / Tektro Compatible Disc Brake Pads

    € 5.99

    Designed for replacing your Shimano Deore M515, M525 etc. and Tektro Auriga Aquila, Gemini, etc. disc brake pads.

    More details
    SKU: S117956 (528147)
    Select a color:
      Select a size :
    Size Guide

    Available online

    Delivery in 6 to 7 days

    Our e-commerce is suspended for a transition period. We expect to be back soon!
    Product benefits
    1. Compatibility
      Compatibility
      Shimano Deore M515, M395, M525, C501, C601, M475, Tektro Auriga, Aquila, Gemini
    2. Braking power
      Effective even in water and mud.
    3. Abrasion resistance
      Sintered material with high coefficient of friction.Lasts 2 x as long as organic
    4. Brake control
      Guarantees steady braking.
    Details
    Product feature
    1. Contents
      1 pair of brake pads 1 spring metal pin not included
    2. Wearing in your brake pads: essential before starting your ride
      You will need to do several short, sharp stops on a flat, clear surface. Squeeze the brakes hard briefly 10 times, and repeat for three or four sets, to wear in your brakes. Braking sharply will wear the pad slightly. Wait about 30 seconds between sets of braking so that the temperature of your brakes will drop back down before you do a new set of 10 squeezes
    3. Watch out for glazing
      If the problem persists despite doing this short, sharp braking, take some sandpaper and lightly sand your brake pads.
    Product testing
    1. Composition
      Brake : 100.0% Aluminium
    2. Cleaning advice
      Take care not to touch the seal with your fingers and do not spray with oil, grease, spray, etc.
    3. Product restrictions
      Do not spray with oil or All-in-One
    4. Product catchline
      For Shimano Deore and Tektro disc brakes.
    5. Lab tested
      model tested and approved in the lab
    Product reviews
    4.3 / 5
    4 reviews
    4 users recommend this product
    Write a review
    • Good, not great

      25/06/2018
      Praveen (India)
      Used for More than 1 year
      I've used these replacement brake pads multiple times for my MTB (Rockrider 500). I've found the following positives and negatives:
      Positive:
      1. Cost
      2. Braking is as effective as with the original pads that come factory fitted
      Negative:
      1. The friction material is very thin and does not last very long (as a comparison, the factory fitted pads lasted ~ 10,000 Km whereas these last only about 1500 - 2000 Km)
      2. The pad, when worn out, fades out completely very abruptly. This could be rather dangerous. I lost braking on the front brake, very fortunately, when running errands close to home. I had done a Nandi ride just the previous weekend and it could have proved catastrophic if it had happened then.
      3. There is no replacement split pin to use with the pads. This is a pain point since I need to go to a hardware store to get a new split pin or reuse the old one (which is really not recommended and can be very unsafe - which, by the way, is done by the Decathlon store mechanics themselves, since they do not have replacement split pins)
    • Perfect for Tektro Auriga brakes.

      17/10/2017
      Keith (United Kingdom)
      Used for 1 week or less
      Exactly what you would expect. Not an expert, all I know is my bike now stops.
    • tektro pads

      11/08/2017
      neil (United Kingdom)
      Used for 2 to 8 weeks
      very good value quick delivery. as good as any pads i`ve used before.
    • Tektro pads

      18/08/2016
      STEFAN (United Kingdom)
      Used for 2 to 8 weeks
      Used on Specialised Rock hopper to replace original Tektro pads. Working great on my hydraulic discs. These get hard use as I also use the bike to commute with some heavy downhill sections.
      Straight forward direct replacements
      None